產品展示

日本島津超快速液相色譜儀Prominenece UFLC

公司名稱：
更新時間：
所在地：
生產地址：
瀏覽次數：
聯系方式：

北京伯樂生命科學發展有限公司上海辦事處（上海天崛電子科技有限公司）
2021-11-11 18:55:25
上海市
進口
1405
耿明查看聯系方式

【簡單介紹】

本公司長期經營各大日本島津,價格實惠,質量有保證.價格請咨詢在線人員.全國統一訂購: 全國統一售后: 訂貨139_17814677

【詳細說明】

Prominence UFLC
Your Solution for Ultra Fast/High-Throughput HPLC Analysis
Researchers demand for faster separations has highlighted the need for increased efficiency in high-speed liquid chromatography.
The direct approach is to increase the phase flow rate （linear velocity）; however,
increasing the phase flow rate in the widely used 5μm particle diameter packed column diminishes chromatographic efficiency.
As a result, two approaches have been developed:
-Use of smaller particle size packing materials-
●This approach will enable more rapid separation. However,
there will be a significant increase in backpressure on the instrument components and column due to the increased column flow resistance.
-Separation under elevated temperature-
●Higher temperature has the effect of accelerating diffusion of the species while decreasing resistance to flow in the column,
enabling better and faster separation simultaneously.
To address the backpressure issue, expensive,
specialized instruments with improved pressure capabilities for high-speed separations have been developed.
These specialized instruments, however, compromise injection performance and limit sensitivity. Consequently,
use in conventional HPLC analysis may be less efficient.
-Features-
Prominence Support for High-Speed Analysis
Utilizing standard components, Prominence supports temperature operation up to 85°C,
enabling, high-speed analysis at lower pressures, while maintaining performance/throughput levels not seen in more expensive instrument configurations.
And with these standard components, Prominence enables researchers to perform both conventional and high-speed analysis.
Prominence supports high-speed analysis through the following features:
●Low volume tubing and flow cell decrease extra-column bandspreading
●10 sec ultra-fast injections with the Prominence SIL-20 Autosampler
●Temperature capability up to 85°C
●Fast data acquisition allows for better signal tracing
These features, together with the use of a 2μm particle material column, can shorten analysis time 5- to 6-fold.
Reproducibility in High-Speed Analysis
Achieving gradient retention time reproducibility is more difficult for fast separations than in normal analysis.
The excellent pumping performance of the Prominence Pumps, with its 3nL flow rate resolution′s micro stroke delivery,
shows outstanding retention time reproducibility.
Retention time RSD values for high-speed gradient operation with Prominence HPLC are typically less than 0.1%
What is High Throughput?
The goal of Fast LC is high throughput, meaning how many samples can be analyzed per day or per hour.
In order to achieve high throughput, not only must the run time of a single analysis be shortened,
but the total cycle time of the injection sequence and run time needs to be optimized.
With Prominence UFLC components, combined with unique 2.2um packing material columns,
which generate less than half the back pressure compared to commercially available 1.8um packing material columns,
researchers can perform both conventional and high-throughput analysis at performance levels far surpassing others.
A specialized instrument is not needed


留言框
感興趣的產品：	*
留言內容：
您的姓名：	*
您的單位：
聯系電話：	*
微信：
常用郵箱：
詳細地址：
省份：	*
驗證碼：	* = 請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7
是否接受其他廠商報價:	* 匹配（1-4家）匹配（1-5家）不接受