 |
廣州霄騰機械有限公司
主營產品： 貼標機，灌裝機，封口機，旋蓋機，包裝機，進瓶理洗瓶機等 |
會員1.png)
|
廣州霄騰機械有限公司
主營產品： 貼標機，灌裝機，封口機，旋蓋機，包裝機，進瓶理洗瓶機等 |
| 參考價 | 面議 |
聯系方式：李生查看聯系方式
更新時間：2018-04-12 22:03:32瀏覽次數：1722
聯系我們時請說明是食品機械設備網上看到的信息，謝謝!
XT-K180 型全自動薄膜捆扎機
XT-K180 Full-automatic Film Strapping Machine
工作原理：
1盒子經輸送皮帶進入積盒架。
2當盒子疊加達到設定的數值時，推盒汽缸開始工作，把多層盒子由積盒架推*板，同時拉動捆包膜，壓盒板向下壓緊盒子后推盒汽缸退回。
3推盒汽缸退回后上熱封板開始工作，當汽缸向下作用時同時拉動捆包膜并壓緊捆包膜，下熱封開始工作，切斷并熱封住捆包膜。
4熱封完成后，上下熱封汽缸及壓盒汽缸復位，一次捆包完成。
5當推盒汽缸復位后頂盒汽缸立刻工作，當上下汽缸復位時疊盒動 作已經完成，開始下一次捆包！
XT-K180 型全自動薄膜捆扎機
Operating principle:
1 Boxes enter box- accumulating shell via conveying belt.
2 Box-pushing cylinder starts to push boxes onto upper plate from box-accumulating shell when boxes reach set number and draws box-strapping film at the same time. Box-pushing cylinder will go back after box-pressing plate compresses boxes.
3 Upper heat-sealing plate starts to run after box-pushing cylinder goes back. Box-strapping film is being drawn and compressed while box-pushing cylinder is going back, next, bottom heat-sealing begins to cut and heat-seal box-strapping film.
4 Upper and bottom heat-sealing cylinder reset after finishes heat sealing, that is to say, one box strapping is finished.
5 After the resetting of box-pushing cylinder, box-peaking cylinder starts to work at once. Box-stacking will be finished after upper and bottom cylinders reset, then the next time of box strapping will begin.
產品介紹
1、設備型號：XT-K180型
2、產品概述：該機采用進口電氣元件，PLC控制系統、人機操作界面、具有運行穩定、操作簡單等特點；主要用于食品、藥品行業盒裝產品的組合捆扎。
Product introduction
1、Type：XT-K180
2、Overview: this machine runs stably and is easy to operate with the use of imported electrical elements, PlC control system and human-machine operation surface, used to strap combinedly products packaged with boxes in food and medicine industries.
技術參數Technology parameters：
XT-K180 型
捆包尺寸Strapping size | zui大為280x200 x 130mm zui小50x30x 50mm Maximum 280x200 x 130 mm minimum 50x 30x 50 mm |
使用包材Strapping material | PE膜 ( PE film) |
適用扎帶規格（寬度） Applicable strapping film standard (width) | 35~80mm |
捆扎膜厚度Film thickness | 50~60um |
捆扎速度Strapping speed | 8-15捆/分鐘(8-15 rounds/ min) |
工作電源Power supply | 220V/50Hz |
設備功率Output power | 500W |
工作氣壓Voltage | 0.6Mpa |
外型尺寸Boundary size | 1600x600x1500mm |
設備總重量Net weight | 300Kg |
