當前位置：深圳市源建傳感科技有限公司>>濕敏電阻>>Humidity sensor SJL31

Humidity sensor SJL31

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品

聯系方式：倪先生查看聯系方式

更新時間：2021-02-04 16:21:36瀏覽次數：466次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

暫無信息

深圳市源建傳感科技有限公司

經營模式：其他

商鋪產品：75條

所在地區：

聯系人：倪先生

詢價 給他留言

產品簡介

Humidity sensor SJL31

詳細介紹

1.Applications

This specifications is applied to relative humidity sensor Type SJL31.

Guaranteed impedance: 31kΩ at 25℃,60%RH

2.Ratings & electronic characteristics

Supply voltage: Less than AC5.0V AC1.0V is recommended.

Test wave shape: Sine or square wave shape.

With frequency 500~2,000Hz

1kHz is recommended.

Power consumption: Less than 2mW

Humidity range: 20－95%RH(in operation) 10－95%RH(in storage)

Temperature range: 0－50℃(in operation) -20－70℃(in storage)

Hysteresis: <2%RH

Response time

moisture absorption tim: <15S

moisture doffing time: <20S

Stability: <2%RH Per year

Interchangable characteristics: (-5%RH~5%RH)

Typical humidity sensor Characteristics: See following table 1

3.Outline Dimensions (Unit:mm)

4.Typical humidity sensor Characteristics(table 1)

	0℃	5℃	10℃	15℃	20℃	25℃	30℃	35℃	40℃	45℃	50℃
20%RH				10M	6700	4680	3900	3000	2400	1750	1450
25%RH		10M	7000	5000	3400	2420	1900	1500	1100	880	700
30%RH	6400	4600	3249	2350	1800	1260	1050	850	650	560	420
35%RH	2900	2100	1428	1099	851	640	520	430	330	260	190
40%RH	1450	1070	676	520	403	298	268	237	185	130	110
45%RH	700	500	343	264	204	152	145	120	88	70	56
50%RH	370	260	182	140	107	81	76	63	51	41	33
55%RH	190	140	106	82	63	49	44	36	30	24	19
60%RH	108	84	66	50	39	31	27.5	23	18.5	15.2	12.4
65%RH	62	49	41	31.5	24.4	20	16	13.6	11.7	9.5	7.8
70%RH	38	33	26	20	15.5	14.2	11	9.2	7.4	6.1	4.9
75%RH	23	18	15.5	12.5	10.4	8.5	7.4	6.1	5.2	4.1	3.3
80%RH	16	12.3	10	8.2	7.2	5.9	5.1	4.3	3.5	2.8	2.6
85%RH	10.8	8.5	7.0	6.2	4.8	3.9	3.5	2.8	2.3	1.9	1.6
90%RH	7.5	5.2	4.8	4.3	3.4	2.8	2.4	1.9	1.6	1.4	1.2
95%RH	5.2	3.6	3.4	3.0	2.4	2	1.8	1.5	1.2	1.0	0.9

5.Packing

(1) 50PCS of sensor are placed in a tray

(2) 20sheets to be packed in a small carton box(SIZE:L190*W150*H55mm)(1,000PCS of sensor in a unit box)

(3) 16 small boxes to be packed in larager box(SIZE:L340*W390*H240mm)(16,000PCS of sensor in a lager box)

6.Mechanical durability

Drop test (Dropped onto wooden plate from a height of 1m, 3 times)	Passed
Vibration test (Amplitude of 5mm, X, Y, Z directions, 10Hz for 20 min.)	Passed
Tensile strength of lead wire (Pulled with 1kg load for 10 sec.)	Passed
Lead wire bending test (lead wire was bended to 90 degreeswith 250g load, and bended again to opposite direction.)	Passed

7.Reliability 1 (Temperature and humidity test)

Sensors were tested/stored in the conditions described below respectively, and the humidity characteristics at 25℃,60%RH before test and after test were inspected, and described in the following.

Test conditions		Variation
1	Sensors are stored in high temperature(80℃) for 1,000 hrs.	＜±5%RH
2	Sensors are stored in low temperature(-20℃) for 1,000 hrs.	＜±5%RH
3	Sensors are stored in high temperature and high humidity (50℃,90%RH) for 1,000 hrs.	＜±5%RH
4	Sensors are stored in low humidity (25℃, less than 15%RH) for 1,000 hrs.	＜±5%RH
5	Sensors are energized in high temperature(80℃) for 1,000 hrs. Supply voltage is AC1.0V, 1kHz.	＜±5%RH
6	Sensors are energized in high temperature and high humidity (50℃,90%RH) for 1,000 hrs. Supply voltage is AC1.0V, 1kHz.	＜±5%RH
7	200 cycles of dewing condition for 10 minutes – drying condition for 10 minutes.	＜±5%RH

8.Reliability 2 (Organic solvent vapor, corrosive gases test)

Test conditions	Variation
1 Methanol (1000ppm, 100 hrs.)	＜±5%RH
2 Ethanol (1000ppm, 100 hrs.)	＜±5%RH
3 Ammonia (1000ppm, 100 hrs.)	＜±5%RH
4 Acetic acid (1000ppm, 100 hrs.)	＜±5%RH
5 Mixed solvents (Benzene 3 : Toluene 3:	Xylene 4, 1000ppm, 100 hrs.) ＜±5%RH
6 H2S (200ppm, 20 hrs.)
7 Acetone (1000ppm, 100 hrs.)	＜±5%RH
8 SO2 (200ppm, 20 hrs.)	＜±5%RH