進口氣動真空球閥(德國OLES奧萊斯閥門)

【進口氣動真空球閥】詳細說明：

氣動真空球閥，是在引進*技術的基礎上進行特殊設計，精心制造的產品。與電氣閥門定位器配套，輸入 4～20mADC信號及0.5～0.7Mpa氣源即可控制運轉，實現對壓力、流量、溫度、液位等參數的調節。它是以壓縮空氣為動力，閥桿帶動閥芯在閥體內轉動90°，可以實現全開-全閉的動作。該產品按其密封性能分為金屬密封與軟密封。系列真空(壓力)球閥是適用于真空系統中接通或切斷管路的介質流。該閥為直通式球閥，靠球面密封，因而既能用在真空狀態下，也能在低壓狀態下使用，并可任意位置安裝。 氣動真空球閥是通過電磁換向閥改變氣路方向，控制執行氣缸來驅動球閥，達到接通或切斷真空(壓力)系統管道路中的介質流。適用的工作介質為帶酸、堿性的氣體或液體，應用于真空、乳制品、酒業、生物工程、食品、制藥、飲料、化妝品及化工領域。可選配反饋信號裝置及電氣閥門定位器。

Pneumatic vacuum ball valve is a product specially designed and carefully manufactured on the basis of introducing advanced international technology. With electric valve positioner, the operation can be controlled by inputting 4-20 mADC signal and 0.5-0.7 Mpa gas source to realize the adjustment of pressure, flow rate, temperature, liquid level and other parameters. It is driven by compressed air, and the valve stem drives the spool to rotate 90 degrees in the valve body, so it can realize the action of full opening and full closing. The product can be divided into metal seal and soft seal according to its sealing performance. Series vacuum (pressure) ball valves are suitable for connecting or cutting off the medium flow in the vacuum system. The valve is a through ball valve, which is sealed by spherical surface, so it can be used not only in vacuum, but also in low pressure, and can be installed at any position. Pneumatic vacuum ball valves change the direction of the air passage through the solenoid directional valve, and control the actuating cylinder to drive the ball valve, so as to connect or cut off the medium flow in the vacuum (pressure) system road. The suitable working medium is acid and alkaline gas or liquid, which is used in vacuum, dairy products, wine industry, bioengineering, food, pharmaceutical, beverage, cosmetics and chemical industry. Feedback signal device and electric valve positioner are optional.

【進口氣動真空球閥】工作原理與結構：

氣動真空球閥由氣動活塞式執行機構與O型球閥組合構成。氣動執行機構相同規格有雙作用式、單作用式(彈簧復位)；標準旋轉軸角度可調節-5～+50范圍；所有滑動部件采用塑料軸承襯套、導向，保持小摩擦力，并有效地抵抗磨損；外殼表面陽極化電鍍，防腐蝕保護；旋轉軸鍍硬質鎳磷合金；螺絲、 螺母為不銹鋼；單作用式彈簧預裝在彈簧座內，很容易裝配或增補彈簧數量；連接、安裝接口標準化模塊設計，方便配裝球閥、信號盒及控制附件；可選擇旋轉方向順時針旋轉或逆時針旋轉；兩端調節螺絲可調節小于標定角度調整。特殊的腐蝕環境可采用不銹鋼外殼。浮動球閥采用特殊設計的雙斜面彈性密封圈，有效的降低了球體與密封圈之間的摩擦力，減少了操作力矩。當介質壓力較小時，密封圈與球體接角面積較小，故有較大的密封比壓，確?？煽棵芊?。當介質力較大時，密封圈與球體面積也相應增大。故密封圈能承受較大的介質推力而不會損壞，確?？煽棵芊?。當介質的沖刷力較大時，特別設計的閥座防沖刷結構能有效的防止介質的沖刷，確保密封圈的使用壽命。對于低壓，超低壓或真空工況用球閥，因介質本身的壓力不能確保閥座可靠密封，而預緊力*使用后又會衰減，特別設計的彈簧加載密封結構，能確保閥門*可靠使用。

【進口氣動真空球閥】保養與維修

（1）要經常檢查管道有沒有鐵銹、焊渣、臟物、塵士。

（2）氣源不能有故障。

（3）定期檢修。

（4）*停放時，接口都要用塑料塞堵上。

（5）當調節閥在使用中不能滿足操作要求，或者經過一段長時期的運行為了預防事故發生而作定

（6）檢查時，先將閥從管線卸下，清洗、拆卸、更換元件，重新組裝測試后重新安裝。

運輸與貯存

1、儲運前檢查各種標志是否完整、齊全、清晰、包裝箱是否整齊牢固，無破損傷裂，后檢查釘箱包扎的可靠性和安全性。

2、運輸時應輕裝輕卸，嚴禁拋滑和撞擊。

開箱與檢查

1、產品運輸?shù)竭_用戶后打開包裝箱，小心搬運，打開即可安裝使用。