進口可調式活塞式減壓閥（德國OLES奧萊斯）

【進口可調式活塞式減壓閥】詳細說明：

過濾活塞式可調減壓閥是一種通過調節來實現減壓的智能調節閥門，可以對整個管道的減壓比例及減壓的長度進行調節，可以實現的定比調節功能。其在項目當中運行過程是：當閥門從進口端給水時，水流過針閥進入主閥控制室，出口壓力通過導管作用到導閥上。當出口壓力高于導閥彈簧設定值時，導閥關閉。

進口可調式活塞式減壓閥(德國OLES奧萊斯)

【進口可調式活塞式減壓閥】詳細說明：

過濾活塞式可調減壓閥是一種通過調節來實現減壓的智能調節閥門，可以對整個管道的減壓比例及減壓的長度進行調節，可以實現的定比調節功能。其在項目當中運行過程是：當閥門從進口端給水時，水流過針閥進入主閥控制室，出口壓力通過導管作用到導閥上。當出口壓力高于導閥彈簧設定值時，導閥關閉?？刂剖彝Ｖ古潘?，此時主閥控制室內壓力升高并關閉主閥，出口壓力不再升高。當閥門出口壓力降到導閥彈簧設定壓力時，導閥開啟，控制室向下游排水。由于導閥系統排水量大于針閥的進水量，主閥控制室壓力下降。進口壓力使主閥開啟。在穩定狀態下，控制室進水、排水相同，主閥開度不變，出口壓力穩定。出口壓力不因進口壓力變化而改變，亦不因主閥出口流量的變化而改變，安全可靠地將出口壓力維持在設定值上。該閥減壓精確，性能穩定、安全可靠、安裝調節方便，使用壽命長?？捎糜谏罱o水、消防系統及工業給水系統。

The filter piston type adjustable pressure relief valve is an intelligent regulating valve which can realize pressure relief by adjusting. It can adjust the pressure relief ratio and length of the whole pipeline and realize the function of proportional regulation. Its operation process in the project is: when the valve feeds water from the inlet end, water flows through the needle valve into the main valve control room, and the outlet pressure acts on the guide valve through the conduit. When the outlet pressure is higher than the set value of the pilot valve spring, the pilot valve closes. When the control chamber stops draining, the main valve controls the pressure in the chamber to rise and closes the main valve, and the outlet pressure does not rise any more. When the outlet pressure of the valve drops to the set pressure of the guide spring, the guide valve opens and the control chamber drains downstream. The pressure of the main valve control chamber decreases because the drainage of the pilot valve system is larger than that of the needle valve. The inlet pressure opens the main valve. In the stable state, the control room has the same water intake and drainage, the main valve opening remains unchanged, and the outlet pressure is stable. The outlet pressure does not change with the change of the inlet pressure, nor does it change with the change of the outlet flow rate of the main valve. The outlet pressure is maintained at the set value safely and reliably. The valve has the advantages of accurate pressure reduction, stable performance, safety and reliability, convenient installation and adjustment, and long service life. It can be used in domestic water supply, fire fighting system and industrial water supply system.

【進口可調式活塞式減壓閥】特點：

1.畢托管向極敏感的限流導閥傳遞壓信號, 無孔板孔口節流, 無壓力損失, 節能.

2.限流導閥中有極靈敏的彈簧對流量進行調節, 操作簡單而且準確.

3.Y形寬體閥腔,流阻小.抗汽蝕性強.

日介質自身壓力自控, 無需外供驅動源.

5.主閥體的進口法蘭與閥座之間設了過濾器, 節省投資成本和安裝費用.

6.內外表面均噴澮環保涂層.確保產品的防府蝕及安全性.

【進口可調式活塞式減壓閥】工作原理;

當管道從進水端給水時，水流過針閥進入主閥控制室，出口壓力通過導管作用到導閥上，當出口壓力高于導閥設定值時，導閥關閉，控制室停止排水，此時主閥控制室內壓力升高并關閉主閥，出口壓力不再升高。

   當出口壓力降到導閥設定壓力時導閥開啟，控制室向下游排水。由于導閥的排水量大于針閥的進水量，主閥控制室壓力下降，進口壓力使主閥開啟。穩定狀態下，控制室進水、排水相同，開度不變，出口壓力不變。

   調節導閥彈簧即可設定出口壓力。

1、壓力控制穩定可靠。導閥、主閥連續工作，下游壓力變化連續、平穩，受進口壓力影響小。

2、操作方便。工作壓力調定后，當上游壓力或流量變動時主閥自動調節，穩定了下游壓力。

3、閥體采用了全通道、直流式、流線型設計。水力損失小，節能效果好。