SMC組合式水箱是由SMC模壓單板，密封材料，金屬緊固件及配管系統組合拼裝而成，可根據用戶需要組裝1-1000m3的水箱。本水箱適用工礦企業單位生活及消防用水，民用住宅及公共建筑，以及對水質要求較高的食品、醫藥、衛生等貯水設施。
SMC玻璃鋼組合式水箱單板規格、性能及掃執行標準
SMC模壓單板規格：1000×1000mm、1000×500、500×500mm。
厚度有5mm、8mm、10mm、12mm、14mm，16mm，其中5mm厚度單板專作水箱蓋板。
SMC模壓單板經機械化成型其性能如下：拉伸強度≥60MPa，彎曲強度≥100MPa，彎曲模量≥7.0GPa，巴氏硬度≥60，吸水度≤1.0%,玻璃纖維含量≥25%。
SMC組合式水箱質量執行中華人民共和國建材行業《JC-658.1-1997》標準。
SMC組合式水箱衛生標準執行中華人民共和國《GB5749-85》標準。
SMC組合式水箱安裝調試：水箱基礎可采用混凝土條形梁，或工字鋼。水箱頂部對角設有透氣空氣過濾裝置。水箱內部均使用拉筋。各管口法蘭均為1.0MPa標準法蘭。在布置水箱位置時，應參照GB17051-1997二次供水設施衛生規范。
SMC sectional water tank is held together by the SMC molded board, sealing materials, metal fasteners and piping system combinations can be assembled according to user needs-1000m3 tank. The tank for industrial and mining enterprises in life and fire water, residential and public buildings, as well as higher water quality requirements of food, medicine, health and other storage facilities.
SMC FRP sectional water tank veneer specifications, performance and sweep the implementation of standards
SMC molded veneer Specifications: 1000 × 1000mm, 1000 × 500,500 × 500mm.
Thickness 5mm, 8mm, 10mm, 12mm, 14mm, 16mm, 5mm thickness of the veneer is designed for the tank cover.
The SMC molded veneer molded by the mechanization of its properties are as follows: tensile strength ≥ 60MPa, the bending strength of ≥ 100 MPa, flexural modulus ≥ 7.0GPa Barcol hardness ≥ 60, water absorption ≤ 1.0%, the glass fiber content of ≥ 25%.
SMC sectional water tank quality of the implementation of the People's Republic of China's building materials industry "JC-658.1-1997 standard.
SMC sectional water tank hygiene standard GB5749-85 standard of the People's Republic of China.
SMC sectional water tank installation and commissioning: the tank base concrete strip beam can be used, or I-beam. Top of the tank on the corner has breathable air filtration devices. Inside the water tank using the stretch. Each nozzle flange are 1.0MPa standard flange. In the layout of the location of the tank, you should refer to GB17051-1997 secondary water supply facilities, sanitation norms.
