欣諭100平方凍干機參數
型號：XY-FD-S100㎡ | |||
Structural standard 結構標準 | Technical parameters 技術參數 | Remark 備注 | |
Infrastructure 基礎設施 | |||
Effective area of shelves 擱板有效面積 | 102㎡ | ||
Largest Capturing amount of water condenser Z大捕水量 | 1000Kg/batch 1000Kg/批 | ||
Power supply 電源 | 440V/60Hz/3P or 380V/50Hz/3P | ||
Installed power 裝機功率 | 205Kw | 380V/50Hz/3P | |
Cooling Water flow 冷卻水 | 50T/Hr | ＜28℃ | |
Main Structure 整機結構 | Separated type (drying oven +machine system) | ||
Weight 重量 | 20000 Kg | ||
Drying Oven 干燥倉 | |||
Oven Material 倉體材料 | SUS304/ 8mm thick SUS304/厚度8mm | ||
Door lock 門鎖方式 | Handle Lock 手柄門鎖 | ||
Door Open direction 開門方位 | 右開門 Right | Decided by customer 客戶 | |
open angle 開啟角度 | ＞110 o | ||
Door material 倉門材料 | SUS304 | ||
Oven Shape and Size 倉體幾何形狀以及尺寸 | Cylinder Φ2400*7100 圓形體 Φ2400*7100 | ||
Frost-resistant glass 防凍玻璃 | Shanghai Tempered lead-free glass 上海光芒玻璃總匯 鋼化無鉛玻璃 φ210、δ17 | ||
Observation window 倉體觀察窗 | Installed on the front 安裝于正面 | ||
Seal 密封 | The door use special cross-section silicon rubber to make sure the vacuum tight 箱門口使用特殊截面硅橡膠緊密貼合，確保真空密封 | ||
Temperature digital sensor 溫度數字傳感器 | T-type thermocouple T型熱電偶 | ||
Shelf 板層 | |||
Shelf size（L*W*H） 板層尺寸（長*寬*高） | 6600×600×15mm | ||
Shelf material 板層材質 | 6063 aluminium alloy 6063鋁合金 | ||
Shelf No. 板層數目 | 13+1 layers （total 28pcs） | The top layer of the shelves is use for temperature compensation Z上面一層為溫度補償板 | |
Distance between shelves 板層間距 | 95mm | ||
Aluminium alloy tray 鋁托盤 | 538*610*35*2
| 312 pcs x 2sets | |
Shelf working temperature 板層工作溫度 | 常溫 ~ +120℃ Room temperature ~ +120℃ | ||
Condenser 捕水器 | |||
Condenser location 捕水器位置 | At the bottom of drying oven 干燥倉底部 | ||
water catching eara of the condenser 盤管捕水面積 | ≥110㎡ | ||
Condenser design temperature. 冷凝器設計溫度 | -40℃，lowest -65℃ -40℃，Z低-65℃ | ||
Cooling rate 冷卻速率 | Room temperature. ~ -40℃, need 20min 室溫~-40℃，20分鐘 | ||
defrosting method 化霜方式 | water injection + soak 噴淋+浸泡 | ||
temperature sensor 溫度傳感器 | T-type thermocouple T型熱電偶 | ||
Refrigerating Unit 制冷機組 | |||
Compressor model and No. 壓縮機型號及數量 | Italy Frascold R-TSL1 100 360Y 100HP 意大利富士豪 | 2set | |
Power consumption 機組功率 | 150Kw | ||
Refrigerant 制冷劑 | R404a | ||
Temp. evenness of shelves 板層溫度均勻性 | +/-1℃ | ||
Oil separator 油分離器 | Shanghai 上海維特 | ||
Filter 過濾器 | Shengzhou 嵊州丙午制冷 | ||
oil pressure differential controller 油壓差控制器 | Denmark Danfoss 丹佛斯 | ||
gas-liquid separator 氣液分離器 | Denmark Danfoss 丹佛斯 | ||
Dehumidification drying filter 除濕干燥過濾器 | Shanghai XY 上海欣諭 | ||
pressure gage 壓力表 | Switzerland REFCO 瑞士威科 | ||
High/low voltage protection relay 高/低壓保護繼電器 | Shengzhou 嵊州丙午制冷 | ||
water-cooled condenser 水冷式冷凝器 | Shengzhou 嵊州丙午制冷 | ||
Corrugated Damping Pipe 波紋避震管 | Denmark Danfoss 丹佛斯 | ||
Manual stop valve 手動中止閥 | 5/8〃Shengzhou 嵊州丙午制冷 | ||
refrigerating solenoid valve 制冷電磁閥 | Shanghai DG8 上海恒溫控制器有限公司DG8 | ||
expansion valve 膨脹閥 | Danmark Danfoss 丹麥丹弗斯 | ||
Red Copper Pipe 紫銅管 | φ22、￠19、￠12 | ||
Refrigeration Return-pipe 制冷回管 | φ129φ89SS seamless pipe 無縫鋼管 | ||
Quick Freezing Room 速凍倉 | |||
Quick freezing room dimension （L*W*H）速凍庫尺寸 | 7.1m×3.8m×4.0m | 1 pc | |
Fan 風機 | 250㎡ | 1 pc | |
Trolley （mm）凍干小車 | 1100*1410*1240 | 6sets x 2 | |
Vacuum Pump System 真空系統 | |||
Initial vacuum System 初真空系統 | |||
Vacuum Pump model.ａnd No. 真空泵型號及數量 | America Tuthill KT-150 5.5KW 美G泰悉爾 KT-150 5.5KW | 1set | |
Roots vacuum pump model. And No. 羅茨真空泵型號及數量 | America Tuthill ZJ-600 5.5KW 美G泰悉爾 ZJ-600 5.5KW | 1 set | |
Maintain Vacuum System 維持真空系統 | |||
Water-ring vacuum pump model. And No. 水環式真空泵型號及數量 Roots vacuum pump model. And No. 羅茨真空泵型號及數量 | America Tuthill美G泰悉KLRC-300 18.5KW America Tuthill美G泰悉爾ZJ-150 3KW America Tuthill美G泰悉爾ZJ-300 4KW America Tuthill美G泰悉爾 ZJ-1200 11KW | 1set 1set 1set 1set | |
corrugated pipe 波紋管 | Φ108、￠89 | Vacuum Pipe Shock Resistance 真空管道防振 | |
Pump air flow 泵組排氣量 | 300L/S | ||
Power consumption 機組功率 | 47.5Kw | ||
Butterfly valve 管道蝶閥 | Ningbo GI-63 GI-80 寧波儀表閥門 | ||
Inflatable Vacuum electromagnetic valve 帶充氣真空電磁壓差閥 | Ningbo 寧波市儀表閥門廠DDC-65 | Automatic open or close with vacuum pump 隨真空泵自動開啟或關閉 | |
vacuum gauge 真空規管 | Chengdu ZJ-54/￠15.5 成都正華電子儀器有限公司ZJ-54/￠15.5 | ||
Final vacuum J限真空度 | 5Pa | No-load 空載 | |
System leakage rate 系統漏率 | 0.005 Pa.m3/sec | ||
Circulation system 循環系統 | |||
Pipe material 管道材料 | SUS304 seamless pipe SUS304不銹鋼無縫管 | ||
Circulation pump 循環泵 | Denmark Grundfos LP series 7.5KW 20m3/hr 丹麥格蘭富 LP系列7.5KW 20m3/hr | 1set 1臺 | |
Power consumption 機組功率 | 7.5Kw | ||
Ball valve 管道球閥 | Shanghai DG40 上海華宇閥門廠DG40 | Comply with the standard of Q/IAKX002-97 符合Q/IAKX002-97標準 | |
Circulating fluid 循環流體采用 | non freezing solution 不凍液 | ||
Heat exchanger 熱交換器 | Sweden ALFA LAVAL 瑞典ALFA LAVAL | 1set 1臺 | |
Heating rate 加熱速率 | ＞1℃/min | ||
Heating method 加熱方式 | Steam heating system 蒸汽加熱 | 0.2m3/hr | |
Control 控制方式 | Manual/Auto control 手動/自動控制 | ||
Condenser size 捕液器尺寸 | ￠300*500 | ||
Control system 控制系統 | |||
System Monitoring Software 系統監控軟件 | Shanghai XY 上海欣諭 | 1set 1套 | |
vertical type control board 立式操縱臺 | Shanghai XY 1100×400×600 上海欣諭1100×400×600 | Control， record 控制，記錄 | |
PLC control system PLC程序控制 | SIEMENS（子）CPU 226 CN AC/DC/relay 繼電器 | ||
HMI touch panel HMI觸摸屏 | SIEMENS 西門子 | ||
Cable of HMI and PLC HMI與PLC連接電纜 | Shanghai XY 上海欣諭 | ||
Constant current 恒流源 | Shanghai XY 上海欣諭 | 1 | |
Switching Power Supply 開關電源 | Taiwan MW companies / 24V/5V 中國臺灣MW公司/24V/5V | 24V 1pc 5V 1pc 各一只 | |
thermocouple 熱電偶 | T-type T型 | 20pcs 20支 | |
vacuum gauge 真空規管 | Chengdu ZJ-54D 成都正華電子儀器有限公司 | 2 | |
AC contactor 交流接觸器 | Germany SCHNEIDER 德G施耐德 | ||
air-break 空氣斷路器 | Germany SCHNEIDER 德G施耐德 | ||
electric cable 電纜 | 16 m2、10㎡、6m2、4m2、2m2 | ||
Quotation: | |||
Price: (含稅含安裝費，客戶需要提供水電公用工程和10立方水池供冷卻塔用) | |||
Trade term: FOB Shanghai | |||
Payment: T/T, 30%預付;，50% 發貨前；安裝調試后10%，質保金10%； | |||
Lead time: 5~6 Month | |||
Warranty: 1 year | |||
