和和HHMF—1200×1200燃煤全自動攪拌油炸鍋
燃煤全自動油炸機
一、全自動油炸機詳細產品說明：
1、 整機設備采用分體式設計，其主要有獨立燃煤爐、引風機、煙囪、油炸機、自動出料框和自動控制配電箱六部分組成。
2、 采用室內油炸，外部燃燒方式，工作環境與燃煤采用墻壁隔離方式，這樣*符合國標食品衛生標準。
3、 采用引風方式燃燒，燃煤省、提溫快，費用底，節省燃煤50％以上，每小時只需8公斤煤即可。
4、 燃燒系統整體為負壓，這樣在燃燒過程中產生的碳灰通過引風機隨煙排出，工作過程中就避免產生煙灰堵加熱管道的現象。
5、 加熱方式是采用管道熱風加熱式，熱量利用率高，可實現全程自動控溫，油溫提升快，油炸溫度*，生產效率高。
6、 采用上zui流行的油水混合油炸工藝設計，油炸過程中產生的食品殘渣沉入底部水里，而且渣中的油被水浸泡后油又回到油層，排出來的全是食品渣，這樣油質用多久都不會因渣碳化而致油變黑現象產生，*避免產品上有附著碳化合物現象。
7、 油炸底部合部采用多漏斗設計，排渣閥在漏斗尖部，這樣就可很方便的將油炸過程中產生的油渣排放干凈，沒有殘留渣現象，上口及出料采用我公司設計，出料入料油不會溢出，整體外部有會有油，很干凈。
8、 本機采用全自動出料和半自動控制兩種方式，具有很強的人性化設計，在油炸工藝一定的情況下，可*實行自動油炸工藝，如有其他要求時，可實現半自動控制方式。
9、 全程油溫實現自動控制，溫度設定調整方便，油溫誤差小，適合炸制各種食品。
10、 底部水溫采用全自動顯示設定功能，水溫*可控，無水沸現象，不會因水沸而把整機油沖出現象發生。
11、 爐子和油炸機接火的口是用專門高溫耐火管做的，鋼板12mm，這種不容易燒壞
Detailed Product Description:
1, the whole device using split design, the main independent coal-fired stove, Fan, chimneys, frying machine, automatic discharge and automatic control box distribution box of six parts.
2, the use of indoor fried, external combustion, work environment and fired using the wall isolated manner, so that full compliance with the national standard of food hygiene standards.
3, the wind mode of combustion, coal province, to temperature quickly, end costs and save more than 50% of coal-fired, coal can only eight kilograms per hour.
4, the combustion system as a whole is negative, this carbon ash produced during the combustion process with the smoke discharged by the induced draft fan, the working process to avoid the production of soot blocking the heating pipe phenomenon.
5, the heating method is to use hot air heating pipes, heat utilization, can achieve full automatic temperature control, oil lifting fast, consistent frying temperature, high production efficiency.
6, using the most popular oil-water mixture frying process design, food residue produced during frying the water sink to the bottom, and the residue of the oil is returned to the water to soak the oil reservoir, came out of the whole food slag, so how long oil will not be carbonized residue caused due to oil blackening phenomenon, compley avoid the phenomenon of adhering carbon compounds on the product.
7, fried bottom engaging portion multi funnel design, slagging valve at the tip of the funnel, diesel emissions so you can easily be produced in a clean frying process, no residual slag phenomenon, catchy and I used the material patented design, the material into the fuel oil does not overflow, the overall external there have oil, very clean.
8, the machine is fully automatic and semi-automatic control of material in two ways, with strong human design, frying process in certain circumstances, can be fully implemented automatic frying process, if other requirements, can achieve semi-automatic control.
9, full oil automatic control, easy to adjust the temperature setting, small oil temperature error, for frying various foods.
10, the bottom of the display with automatic temperature setting function, the water temperature is compley controllable, water boiling phenomenon, not because of boiling water and oil out of the whole phenomenon.
11, stove and frying machine energize mouth is with a special high-temperature refractory tubes made of steel plate 12mm, this is not easy to burn out
二、燃煤全自動油炸機參數： Fired automatic frying machine parameters:
型號
Model
額定功率
Rated power(kw)
外形尺寸
Appearance size
油槽尺寸Oil tank size
HHMF—1200×1200
電加熱 60kw
1360×1360×1250
1200×1200×450
HHMF—1200×1200
導熱油加熱
1360×1360×1350
1200×1200×450
HHMF—1500×1500
1660×1650×1350
1500×1500×450
HHMF—1200×1200
燃煤加熱
1400×1400×1350
1200×1200×480
HHMF—1500×1500
1700×1700×1350
1500×1500×480
