Product Features: 產品特征：

With the increasingpopularity of smart phones dominated by Apple and Samsung, the application ofthe key component---LCD touch screen is being increased larger and larger.However, some defect products, like air bubbles, black spots, white spots, misplacement, will inevitably be produced during the LCD touch screen OCA/LOCAfull lamination process. But the cost of LCD touch screens is higher, whichmakes the related enterprises have the requirements of reworking LCD touchscreens.

隨著智能手機的日益普及，蘋果和三星占據主導地位，關鍵組件--LCD觸摸屏的應用越來越大。然而，在LCD觸摸屏OCA/LOCA全層壓過程中不可避免地產生一些缺陷產品，如氣泡、黑點、白點、錯位等。但LCD觸摸屏的成本較高，使相關企業有返修LCD觸摸屏的要求。

LXBX series -150°C ultralow temperature LCD frozen separator freezer can cool down the touch screen bymeans of cold and heat exchanging through cold air in the chamber, which makethe OCA glue and optical glue loses viscosity at low temperature and separateout the LCD from the LCD screen module (that is the LCD screen is to beseparated from the TP or cover plate), or peel off TP or cover plate from theLCD screen module, recycle or renovate LCD or LCD panel.

LXBX系列-150°c超低溫液晶顯示冷凍分離器可通過室內冷空氣冷熱冷卻觸摸屏，使OCA膠和光學膠在低溫下失去粘度，并將LCD與LCD屏模塊分離(即LCD屏幕與Tp或蓋板分離)。或從液晶屏模塊中剝離tp或蓋板，回收或翻新LCD或LCD面板。

LXBX series -150°C ultralow temperature LCD frozen separator freezer has a variety of volumes from 50Lto 650L for users to choose from.

LXBX系列-150°c超低溫液晶冷凍分離器，可供用戶選擇，體積從50升到650升不等。

LXBX series -150°Cultra low temperature LCD frozen separator freezer has a variety oftemperatures from -145℃ to -150℃, for users to choose from.

LXBX系列-150°c超低溫液晶顯示冷凍分離器有多種溫度，從-145℃到-150℃，供用戶選擇。

Temperature controlsystem: Microcomputer intelligent temperature controller, temperature digitalsetting, digital display. The temperature controller has password lockingfunction in case of mistuning by the irrelevant person.

溫度控制系統：微機智能溫度控制器，溫度數字設定，數字顯示。溫度控制器具有密碼鎖定功能，以防被無關人員誤用。

Heat insulating material:160mm thickness high pressure and high density foamed Polyamine Ester,effectively reduce the loss of cold capacity, multi-door seal off the coldcapacity, the whole chamber has good temperature preservation.

保溫材料：160mm厚、高密度發泡聚胺酯，可有效降低冷量損失、多門封冷能力，整個腔體具有良好的保溫性能。

The inner liner inside thecase is made of corrosion-proof embossed Aluminum plate or stainless steelplate. The surfaces of the plates are very smooth and clean. It has goodthermal conductivity and corrosion resistance.

箱內內襯采用耐腐蝕壓花鋁板或不銹鋼板制成。這些盤子的表面非常光滑和干凈。具有良好的導熱性能和耐腐蝕性能。

Imported advancedrefrigeration compressor and accessories, can run continuously for 24hours,more stable refrigeration performance.

進口*的制冷壓縮機及附件，可連續運行24小時，制冷性能更穩定。

Safety electricityprotection system equipped with ground wire, over heat protection, short circuitprotection, over current protection, high & low voltage protection, reversephase lack protection etc. Greatly ensure users’ safety.

帶地線的安全電氣保護系統，過熱保護，短圈保護，過流保護，高電流保護。

Unique non-fluorine-freemixed refrigerant, energy saving and environmental protection.

*的無氟混合制冷劑，節能環保.

OperationInstructions: 操作說明

1.) Beforeusing, it will take the machine around 30～40 minutes tocool to the set working temperature.

1.) 使用前，要花大約30~40分鐘左右讓機器冷卻至設定工作溫度。

2.) Place theLCD screen on the frozen plate.

2.) 將液晶屏放置在冷凍板上。

3.) Freezingtime from 30 seconds to 1 minute depends on different LCD screens.

3.) 凍結時間從30秒到1分鐘取決于不同的液晶屏幕。

4.) Take outLCD screen and separate it.

4.) 取出液晶屏并將其分開。

5.) Below isthe URL of youtube video link for your reference:

5.) 以下是優酷視頻鏈接的URL，供您參考：

/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0

Tips: 提示

1.) Forserious crushed glass, please stick a tape on glass for safety and good formachine

1.) 如有嚴重碎玻璃，請?jiān)诓Ａ腺N上膠帶，以確保安全及對機器有利。

2.) Pleasemake sure the operator wears gloves in case of danger.

2.)為防止發生危險，請確保操作人員戴手套。

3.) It is mucheasier to separate out the bracket and other components after freezingprocessing. Please pay attention to the back-light water inlet.

3.) 在冷凍處理后，更容易分離出支架和其它部件。請注意背光入水口。

4.) Afterseparating the LCD screen, pay attention to the water treatment and temperaturerecovery.

4.) 液晶屏分離后，注意水的處理和溫度的回收。

5.) Whenseparating the curved screen, the separation risk caused by the temperature differencebetween 2 sides of the curved surface screen. Please pay more attention to thispoint.

5.) 曲線篩分離時，由于曲面屏兩側溫差引起的分離風險。請注意這一點。

6.) After LCDseparation, please put the glue side upward to avoid sticking on the articlesurface after the temperature return to the normal.

6.) 液晶顯示器分離后，請將膠水側向上放置，以避免雜物粘在膠水表面上，并且讓屏溫度恢復正常。

Product Parameters:

本產品還可用于冷縮裝配領域

冷縮裝配箱/工件冷處理/銅套冷縮裝配箱/深冷裝配箱/模具冷縮裝配/低溫裝配/軸承冷縮裝配