性能與特點
·系統設有電磁閥可加裝氣動調壓閥,對氣源進行精確控制,與潤滑液充分混合霧化,減少機械*之損耗,冷卻潤滑效果更佳。
·a.PLC控制:冷卻潤滑時間和間歇時間由外部PLC控制
·b.無控制:冷卻潤滑時和間歇時間無需控制
·當冷卻潤滑液不足時蜂鳴器會發出報警信號、并將異常信號輸出到PLC系統。
·系統建議使用氣壓為0.4-0.6MPa
·默認液體和氣管直徑6mm
·配合(MPV型)自吸式冷卻潤滑噴霧器使用。
the system is equipped with a solenoid valve that can be equipped with a pneumatic pressure regulating valve to precisely control the air source and fully atomize it with lubricating fluid to reduce the loss of mechanical tools and achieve better cooling and lubrication effect.
· a.PLC control: cooling and lubrication time and intermittent time are controlled by external PLC
·b. No control: no control is required for cooling and lubrication and intermittent time
· When the cooling lubricant is insufficient, the buzzer will send an alarm signal and output the abnormal signal to the PLC system.
· Air pressure of 0.4-0.6mpa is recommended for the system
· Default diameter of liquid and trachea is 6mm
· Suitable for use with (MPV) self-priming cooling and lubricating sprayer.