進口蝸輪漿液閥(德國奧萊斯閥門品牌)
【進口蝸輪漿液閥】詳細說明:
液閥又名無凹槽漿液閥，整體式漿液閥，閥體密封采用“O"型復合密封圈結構，克服了原對夾式漿液閥采用“U"型密封墊受力后易移位和變形，介質外泄等缺點。閘板采用刀形結構，解決了灰漿沉淀密封槽內，閥門關閉不嚴，外泄漏等問題。 采用全圓形的通道設計，在刀板上端安裝有聚四氟乙烯、刮泥器，聚膠脂或含Ni耐磨鑄鐵制成的耐磨折邊錐體安裝在刀閘閥的進口端，可在閥體四周設置多個沖洗口。刀板底端加工成刀刃，光潔度高，保證了良好的密封性。
Fluid valve is also known as grooveless slurry valve, integral slurry valve. The valve body seal adopts "O" type compound seal ring structure, which overcomes the shortcomings of "U" type seal gasket, which is easy to displace and deform, medium leakage and so on. The gate adopts a knife-shaped structure, which solves the problems of improper closure and leakage of the valve in the slurry sedimentation sealing groove. A fully circular channel design is adopted, and a PTFE and a mud scraper are installed at the upper end of the cutter plate. The wear-resistant flange cone made of polyester resin or Ni-containing wear-resistant cast iron is installed at the inlet end of the cutter gate valve, and a plurality of flushing ports can be arranged around the valve body. The bottom end of the cutter plate is machined into a cutting edge, which has high smoothness and ensures good sealing performance.
【進口蝸輪漿液閥】特點：
一體式漿液閥主要由閥體、O型圈、閘板、閥桿、支架等部件組成。
1.采用對夾一體式結構，體積小，重量輕；
2.*敞開的通道，可以防止介質在閥內的沉積；
3.采用可更換式密封結構，一改普通漿液閥與刀型閘閥維修難的問題；
4.閥體材質由傳統的鑄鋼更換成了球墨鑄鐵，耐腐蝕性更好，有效延長了使用壽命
【進口蝸輪漿液閥】結構說明：
漿液閥分對夾式和整體式，對夾式閥體密封采用復合材料配置的“U”型和“T”型復合結構。整體式閥體密封采用“O”型復合密封圈結構，克服了原對夾式漿液閥采用“U”型密封墊受力后易移位和變形，介質外泄等缺點。閘板采用刀形結構，解決了灰漿沉淀密封槽內，閥門關閉不嚴，外泄漏等問題。
【進口蝸輪漿液閥】應用：
適用于礦山電廠的選煤、排渣、城市污水處理、食品、造紙、醫藥、石油、化工等油品、水、蒸汽管路上，接通或截斷管路中的水泥漿、金礦粉、礦砂、爐渣、煤泥、紙漿、木漿、尾礦、纖維、粉塵、化學品處理污水、沉淀池、瀝青、料倉出口、水果、谷物、屠宰廠廢水等介質。
