進口襯膠隔膜閥,(德國OLES奧萊斯閥門品牌)
【進口襯膠隔膜閥】詳細說明：
精小型氣動活塞隔膜調節閥由隔膜閥和氣動執行機構兩部分組成，它以壓縮空氣為動力，實與對工藝管道中流體介質流量的調節。由于在結構上采用帶有耐腐蝕襯里的閥體和耐腐蝕的隔膜、無填料函結構、節流元件為彈性隔膜、閥體流道平滑，故氣動薄膜隔膜閥具有陰力小，流量大、無外漏和方便可靠、防火防爆的優點，廣泛適用于工業自動化系統中的強酸、強堿、強腐蝕、高粘度、含穎粒、帶纖維以及有毒和不充許污染的介質的流量調節。 隔膜閥的關閉與開啟是通過來自管路的壓力作用于增強橡膠隔膜實現的。當壓力介質進入閥門控制腔，隔膜下壓，關閉閥門通道，當控制腔壓力排向大氣或下游管道，隔膜上升，閥門通道被打開。閥門沒有閥桿、密封墊、定向座等，通道中運動的唯1部件就是隔膜，所以不存在銹蝕及抱死現象，具有更高的穩定性。多種結構形式及控制形式，可適用于多種的流體控制需要 。
The diaphragm control valve of fine and small pneumatic piston consists of diaphragm valve and pneumatic actuator. It is powered by compressed air and regulates the flow rate of fluid medium in the process pipeline. Pneumatic membrane diaphragm valves are widely used in industrial automation systems because of their advantages of small negative force, large flow rate, no leakage, convenience, reliability, fire and explosion protection, because they are constructed with corrosion-resistant body and corrosion-resistant diaphragm, non-stuffing box structure, elastic diaphragm as throttle element and smooth flow passage of valve body. Flow regulation of strong acid, strong alkali, strong corrosion, high viscosity, glumes, fibers and toxic and non-polluting media. The closing and opening of the diaphragm valve is realized by the pressure from the pipeline acting on the reinforced rubber diaphragm. When the pressure medium enters the valve control chamber, the diaphragm is pressed down and the valve passage is closed. When the pressure of the control chamber is discharged into the atmosphere or downstream pipeline, the diaphragm rises and the valve passage is opened. Valves have no stem, gasket, directional seat, etc. The only moving part in the passage is the diaphragm, so there is no rust and lock phenomenon, which has higher stability. Various structural forms and control forms can be applied to a variety of fluid control needs.
【進口襯膠隔膜閥】用途：
直通式襯膠隔膜閥于控制非腐蝕性或一般腐蝕性介質，閥體內腔表面無襯里或覆有可供選擇的各種橡膠、適用于不同工作溫度 和液體管路。
【進口襯膠隔膜閥】材料說明：
閥體：鑄鐵、球墨鑄鐵、碳鋼、不銹鋼 閥蓋：鑄鐵、球墨鑄鐵、碳鋼、不銹鋼 襯里：無襯里、橡膠 隔膜：橡膠 閥瓣：鑄鐵、碳鋼 閥桿：碳鋼、不銹鋼 手輪：鑄鐵
【進口襯膠隔膜閥】結構特點：
隔膜閥是一種特殊形式的截?cái)嚅y； 1、彈性密封的開閉件，確保沒有內漏； 2、流線型的流道，使得壓力損失?。?3、沒有填料函，因此沒有外漏； 4、閥體與蓋被中間隔膜隔開，使得隔膜上方的閥蓋，閥桿等零件不受介質侵蝕； 5、隔膜可更換，維護費用低； 6、襯里材料的多樣性，可適用于各種介質，并具有良好的耐腐蝕性。
