3006A防潮加速度傳感器

概述

The Dytran 3006A is a moisture resistant, high sensitivity single axis IEPE accelerometer with an overall weight of 12 grams.

Featuring a stainless steel construction, 100 mV/g sensitivity, 10-32 mounting hole and low noise JFET electronics, the Dytran model 3006A incorporates a 10-foot integral cable with a splash-proof boot at the point of sensor and cable connection. The cable-to-accelerometer boot seal makes it possible for the sensor to be temporarily submerged during testing. Units are hermetically sealed for reliable operation in high humidity and dirty environments, and case isolated to avoid EMI/ground loop interference.

特性

1. 100 mV/g sensitivity

2. 50g range

3. 0.32 to 5,000 Hz frequency range (±5%)

4. 10-foot integral cable

5. 10-32 tapped hole

6. 12 grams

7. Stainless steel

8. Hermetic

9. Case isolated

10. Splash proof boot

11. Moisture resistant

12. IEPE

應(yīng)用

1. Short-term immersion

2. Structural monitoring

3. Vibration testing in damp environments

參數(shù)

PHYSICAL

Weight, Less Cable, Max 0.42 oz 12 grams Supplied Accessories:

Mounting Provision : Tapped Hole 10-32 X .20 Deep 10-32 X .20 Deep

Cable Length 10 FT 25 m

Material : Base, Cap and Connector 300 S.S. 300 S.S.

Sensitivity, ±10% .

Range F.S for ± 5 Volts Output ±50 g ±490 m/s2

Frequency Range ±5% 0.32 to 5000 Hz 0.32 to 5000 Hz

±3 db 0.16 to 10000 Hz 0.16 to 10000 Hz

Resonant Frequency 35 kHz 35 kHz

Equivalent Electrical Noise Floor 0.00001 Grms 0.0001 m/s2 rms

Linearity [3] ± 1% % F.S. ± 1% % F.S.

Maximum Transverse sensitivity 5 % 5 %

Strain Sensitivity, Max 0.001 g/με 0.01 m/s2

Maximum Vibration ±600 G's,peak ±5886 m/s2 peak

Maximum Shock ±3000 G's,peak ±29430 m/s2 peak

Temperature Range -60 to+250 °F -54 to +121 °C

Seal, Accelerometer Hermetic Hermetic

Supply Current Range [4] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range + 18 to +30 Volts + 18 to +30 Volts

Output Impedance,Typ 100 Ω 100 Ω

Bias Voltage +11 to +13 VDC +11 to +13 VDC

Discharge Time Constant 0.8 to 1.5 Sec 0.8 to 1.5 Sec

Output Signal Polarity for Acceleration Towards Top Positive Positive

Electrical Isolation, Case Ground to Mounting Surface 10 GΩ,min 10 GΩ,min

配件

Supplied Accessories: (1) model 6200 mounting stud (10-32 to 10-32)

Recommended Accessories: model 4110C current source power unit

訂貨型號

3006A